欧美激情一区二区_男同GAY网站_国产看黄网站又黄又爽又色_亚洲av综合久久九九

EN
Logo Product center

Yuansheng products

YSYD-3.0

YSYD-3.0

YSYD-2.2

YSYD-2.2

YSYD-1.5

YSYD-1.5

YSY-3.0

YSY-3.0

YSY-2.2

YSY-2.2

YSY-1.5

YSY-1.5

YSY-1.5

YSY-1.5

YSY-1.5

YSY-1.5

20 Year

experience
Logo

About us

Your reliable aquaculture partner

The company specializes in the production of floating aerator, impeller aerator, water wheel aerator, surge aerator, Ross aerated aerator, vortex micro hole aerator QY oil-immersed submersible pump, QD / Q multi-stage submersible pump, WQD / WQ sewage submersible pump, QDX / QX small submersible pump, permanent magnet frequency conversion submersible pump and other twelve series of more than 90 varieties of enterprises, product variety, complete specifications.

  • Global online sales coverage 95%

  • After-sales service satisfaction 100%

View more

Advantage

Work hand in hand with all customers to create brilliant

The annual production capacity of the company reaches 20~30 Ten thousand sets, from the design and processing of molds, cars, spare parts, stamping, pressure, grinding to finished product assembly, to achieve the production of a train, constantly improve the quality awareness of staff, improve the production and testing equipment, enhance product research and development ability, in order to provide customers with high-quality products and struggle.

  • Yuansheng aquatic products have 12 series of more than 90 varieties.
  • The company's annual production capacity of 20 ~ 300,000 sets
  • Has a strong R & D and Production Technology team
  • View more
    Professional manufacture of aerator over 20 years
    Keep the TOP sale's volume on domestic market

    Contact hotline:+8618006862233

    Contact us
    View more

    YUANSHENG message

  • Countermeasures for abnormal operation of aerator equipment in fish ponds

    Fish pond aerator is a method of severely contacting air and water, with the aim of dissolving oxygen in the air into water or dissolving unwanted gases in water.

    The double membrane theory holds that there are gas and liquid films at the gas water interface, and air and liquid flow outside the gas and liquid films, in a turbulent state. There is laminar flow between the gas film and liquid film, without convection, and under certain conditions, pressure and concentration gradients occur. There are two main types of aeration: air blowing aeration and mechanical aeration. Blast aeration is an aeration method that uses an aeration blower, aerator, diffuser plate or diffuser tube to introduce bubbles into water. This method is commonly used in sewage treatment. Mechanical aeration refers to the aeration method that uses impellers and other instruments to introduce bubbles. All aeration equipment must meet the following three functions: maintaining effective gas water contact, and maintaining a certain oxygen concentration in the water while biological oxidation continuously consumes oxygen. Generate sufficient mixing and water circulation within the aeration zone, maintain sufficient liquid velocity, and suspend biological solids in the water in the air. For biological aeration equipment, if the concentration of organic matter is too high or there is too much residual microbial film on the filter layer, partial anaerobic metabolism will occur inside the filter layer, leading to abnormalities. The solution is as follows: reduce the accumulation of microbial membranes in the aeration equipment, allow the biofilm to detach normally, and discharge it out of the tank through backwashing to ensure the normal operation of the aeration facilities and avoid the impact of high concentration or high load sewage. The biofilm is severely detached, and abnormal detachment of the biofilm is not allowed during normal operation of the aeration equipment. The main reason for producing a large amount of biofilm detachment is due to water quality reasons (such as high concentrations of inhibitory or toxic pollutants or sudden changes in acidity). The solution is to improve the water quality so that the water entering the aeration equipment is basically stable.

    The treatment efficiency of fish pond aerators is low. If the aeration system is working normally and the growth of microbial membranes is good, the treatment efficiency will decrease. Usually, it is not caused by rapid changes in water quality or the inflow of toxic pollutants, but by the acidity, dissolved oxygen, water temperature, and short-term overload operation of the incoming water. For this phenomenon, as long as the degree of decrease in treatment efficiency does not affect the standard discharge of water quality, no measures will be taken, and it will return to normal after a period of time. If the water quality affects the standard discharge, some local adjustment measures should be taken, including adjusting the acid value of the inlet water, adjusting the gas supply, reactor insulation, inlet water heating, etc. When the pollution blocking ability of the aeration equipment decreases and backwashing is normal, only the pollution blocking ability of the aeration equipment decreases. This may be due to poor pretreatment effect and high carbon dioxide concentration in the water. At this time, it is necessary to strengthen the operation and management of the pretreatment facilities. The inflow water quality is abnormal and the inflow concentration is high. In this case, it is necessary to increase the aeration amount and aeration time to maintain the stability of the sludge load. This situation of low inflow concentration mainly occurs in rainstorm weather, which needs to be solved by reducing the aeration force and time. The abnormal water quality, mud and turbidity in the effluent are mainly caused by thick biofilm thickness, strong backwashing intensity or too many backwashing times, microbial loss, and decreased treatment efficiency. The solution is to increase the aeration rate and increase the dissolved oxygen content. The local water distribution system is obstructed, which may lead to insufficient local oxygen. The solution is to rectify or increase the recoil intensity. The main reason for the slight yellow color of the water is that the amount of chemical phosphorus removal in the biological aeration equipment is too much, and the iron salt exceeds the standard. Reducing the amount of chemical phosphorus removal is sufficient.


  • A variety of products, complete specifications. Since the establishment of the factory, after continuous exploration and accumulation, more than a dozen series and dozens of specification products have been developed, which are widely used in increasing oxygen in fish ponds, farmland drainage and irrigation, building foundation cleaning, environmental protection chemical industry and household water supply, etc.
  • WhatsApp/TEL: +8618006862233

    Email:may@yuanshengmech.com

    Address:Building 2, Building 8,520 Industrial Park, Dongan Village, Daxi Town, Wenling City, Zhejiang Province

  • Yuansheng is a manufacturer and exporter specializing in aerator and submersible pump.

    Focus on us for more dynamics

  • COPYRIGHT ? 2024 Taizhou Yuansheng Aquaculture Machinery Co., Ltd.  網站地圖 Technical support: tzzhexing.com
    夜色88V精品国产 | 黄色精品免费网站在线 | 你懂的网址在线观看大全视频在线 | 国产精品xxxxxx | 国产又大又粗又硬视频 | 成人在线免费观看麻豆 | 免费超爽超舒服av网站 | 午夜无码精品一区二区三区蜜桃臀 | 亚洲一二三四五区 | 另类小说亚洲色图 | 高潮毛片又色又爽免费 | 精品国产91久久久久久一区黄无 | 国产精品嫩草69 | 亚洲AV无码A片在线观看蜜桃 | 在线黄片,.com| 一区三区视频在线观看 | 蜜桃秘 免费一区二区三区 国产精品久久久久久久白浆 | 无码区免费看一级毛片A片 中文字幕日产A片在线看 | 特级婬片A片AAA毛片艳谭97 | 公天天吃我奶躁我的在线观看 | 麻豆免费视频福利 | 亚洲色图 校园春色 | 在线观看免费高清完整版成人 | 亚洲精品无码久久毛片美乳 | 强行糟蹋人妻HD中文字幕动漫 | 沈阳户外少妇BBBB真爽 | 亚洲免费在线观看 | 亚洲av二区三区 | 后进极品白嫩翘臀在线视频 | 九月婷婷人人澡人人爽老狼信息网 | 香蕉91成人一区二区三区飘花 | 先锋影音中文字幕 | 成人H动漫精品一区二区三区蘑菇 | 久久久精品国产免费观看同学 | 久久久久久久人妻一区二区三区 | 蜜臀av无码人妻精品一区二区三区 | 欧美精品久久一级A片免费放纵欲 | 久久久无码人妻精品一区二区三区 | 农村熟妇丰满高潮A片 | 国产精品人妻AⅤ在线看 | 在线视频日韩欧美精品 |